Kincrome Cutting & Polishing Compounds are designed to work seamlessly with our cutting & polishing pads, high-quality abrasive particles for fast and efficient correction of paint defects.
Kincrome Ceramic Sealant Compound Forms a hard, durable shell on your car's paint that protects it from UV rays, acid rain, and other environmental contaminants for up to 6-months thanks to its Si02 based formulation.
Tips:
- Prep pad before use by applying a small amount of compound, then spread and massage it into the pad.
- Apply a small amount of additional compound to the prepped pad. Spread over the polishing surface on low speed before increasing speed to begin polishing.
- Work a small section at a time, using light pressure in controlled, overlapping motions. This will prevent excess heat which could lead to premature pad failure or paint damage.
- Clean pad regularly to remove excess compound and residue. Use compressed air or a soft bristle brush.
Care:
- After use wash pad using warm water and mild detergent. Agitate to release residue.
- Store pad when dry away from dust and debris for future use.
Important: Polishing is a paint removal process. Care must be taken to preserve original paint finish. Results may vary.