Kincrome Cutting & Polishing Compounds are designed to work seamlessly with our cutting & polishing pads, high-quality abrasive particles for fast and efficient correction of paint defects.
Kincrome Light Polishing & Swirl Remover Compound is designed to refine paint and eliminate very light swirls and light holograms, leaving behind a glossy finish ready for a premium wax or sealant when used with Kincrome light & finish polishing pads.
Tips:
Prep pad before use by applying a small amount of compound, then spread and massage it into a medium or light pad.
Apply a small amount of additional compound to the prepped pad. Spread over the polishing surface on low speed before increasing speed to begin polishing.
Work a small section at a time, using light pressure in controlled, overlapping motions. This will prevent excess heat which could lead to premature pad failure or paint damage.
Clean pad regularly to remove excess compound and residue. Use compressed air or a soft bristle brush.
Important: Polishing is a paint removal process. Care must be taken to preserve original paint finish. Results may vary.